Concrete Contractors in Arlington, TX

Concrete contractors serving Arlington, TX pour driveways, patios, and slabs across the city, from the neighborhoods near the entertainment district to the established streets south and west of downtown. Our crew builds on the same expansive North Texas clay that rules every job in the metroplex, so prep and drainage lead the work.

Concrete in Arlington, TX

Concrete work built for Arlington

Arlington's mix of mid-century homes and newer construction means plenty of driveway replacements, patio additions, and slab work for garages and additions. The approach is the same one that holds up across DFW: a compacted base, correct slab thickness, control joints spaced for the soil, and grading that moves water away from the house.

Whether it is a stamped patio for a backyard near Lake Arlington, a new driveway, or a commercial flatwork pour, describe the project when you call and our crew will walk the site and give you a straight estimate.

Arlington is a straight shot west of Cedar Hill on I-20, and the soil changes along the way. Much of the city rests on dense clay that swells after a soaking rain and shrinks hard in August, while some parts of the city pick up sandier ground. That mix means two houses a few miles apart can need different base prep. A site visit and a close look at the existing cracks tell the story better than any rule of thumb.

A large share of Arlington's homes were built from the 1960s through the 1980s as the city grew around the General Motors plant, the university, and the ballparks. Driveways poured in that era were often thinner than today's work, and many have shifted, cracked across the panels, or settled at the garage. Newer subdivisions in south Arlington bring a different request list: wider patios, covered outdoor kitchens, and pool surrounds.

If you are comparing bids from a concrete contractor in Arlington, TX for driveway replacement, ask how the crew handles the ground under the old slab. Pulling out broken concrete often reveals voids and soft spots, and those need fill and compaction before new steel goes down. Low lots near Lake Arlington and along Village Creek can stay wetter after storms, so grading the new slab to shed water matters even more there.

Next steps: check whether your HOA needs to sign off on finish and color, and contact the City of Arlington about permits when a project touches the street approach or sidewalk. Pantego and Dalworthington Gardens are separate towns surrounded by Arlington, each with its own city hall, so confirm which city you live in before you apply. Crews reach most Arlington addresses from Cedar Hill by I-20 or SH-360. Call with photos of the current slab and a rough size, and the first visit can focus on the ground, the grade, and the details that set the price.